Struct futures_util::io::AllowStdIo

pub struct AllowStdIo<T>(_);

A simple wrapper type which allows types which implement only implement std::io::Read or std::io::Write to be used in contexts which expect an AsyncRead or AsyncWrite.

If these types issue an error with the kind io::ErrorKind::WouldBlock, it is expected that they will notify the current task on readiness. Synchronous std types should not issue errors of this kind and are safe to use in this context. However, using these types with AllowStdIo will cause the event loop to block, so they should be used with care.

Implementations

impl<T> AllowStdIo<T>

pub fn new(io: T) -> Self

Creates a new AllowStdIo from an existing IO object.

pub fn get_ref(&self) -> &T

Returns a reference to the contained IO object.

pub fn get_mut(&mut self) -> &mut T

Returns a mutable reference to the contained IO object.

pub fn into_inner(self) -> T

Consumes self and returns the contained IO object.

Trait Implementations

impl<T> AsyncBufRead for AllowStdIo<T> where
    T: BufRead, 

fn poll_fill_buf(
    self: Pin<&mut Self>,
    _: &mut Context<'_>
) -> Poll<Result<&[u8]>>

Attempt to return the contents of the internal buffer, filling it with more data from the inner reader if it is empty.

fn consume(self: Pin<&mut Self>, amt: usize)

Tells this buffer that amt bytes have been consumed from the buffer, so they should no longer be returned in calls to poll_read.

impl<T> AsyncRead for AllowStdIo<T> where
    T: Read, 

fn poll_read(
    self: Pin<&mut Self>,
    _: &mut Context<'_>,
    buf: &mut [u8]
) -> Poll<Result<usize>>

Attempt to read from the AsyncRead into buf.

fn poll_read_vectored(
    self: Pin<&mut Self>,
    _: &mut Context<'_>,
    bufs: &mut [IoSliceMut<'_>]
) -> Poll<Result<usize>>

Attempt to read from the AsyncRead into bufs using vectored IO operations.

impl<T> AsyncSeek for AllowStdIo<T> where
    T: Seek, 

fn poll_seek(
    self: Pin<&mut Self>,
    _: &mut Context<'_>,
    pos: SeekFrom
) -> Poll<Result<u64>>

Attempt to seek to an offset, in bytes, in a stream.

impl<T> AsyncWrite for AllowStdIo<T> where
    T: Write, 

fn poll_write(
    self: Pin<&mut Self>,
    _: &mut Context<'_>,
    buf: &[u8]
) -> Poll<Result<usize>>

Attempt to write bytes from buf into the object.

fn poll_write_vectored(
    self: Pin<&mut Self>,
    _: &mut Context<'_>,
    bufs: &[IoSlice<'_>]
) -> Poll<Result<usize>>

Attempt to write bytes from bufs into the object using vectored IO operations.

fn poll_flush(self: Pin<&mut Self>, _: &mut Context<'_>) -> Poll<Result<()>>

Attempt to flush the object, ensuring that any buffered data reach their destination.

fn poll_close(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Result<()>>

Attempt to close the object.

impl<T> BufRead for AllowStdIo<T> where
    T: BufRead, 

fn fill_buf(&mut self) -> Result<&[u8]>

Returns the contents of the internal buffer, filling it with more data from the inner reader if it is empty.

fn consume(&mut self, amt: usize)

Tells this buffer that amt bytes have been consumed from the buffer, so they should no longer be returned in calls to read.

pub fn read_until(
    &mut self,
    byte: u8,
    buf: &mut Vec<u8, Global>
) -> Result<usize, Error>

Read all bytes into buf until the delimiter byte or EOF is reached.

pub fn read_line(&mut self, buf: &mut String) -> Result<usize, Error>

Read all bytes until a newline (the 0xA byte) is reached, and append them to the provided buffer.

pub fn split(self, byte: u8) -> Split<Self>

Returns an iterator over the contents of this reader split on the byte byte.

pub fn lines(self) -> Lines<Self>

Returns an iterator over the lines of this reader.

impl<T: Clone> Clone for AllowStdIo<T>

fn clone(&self) -> AllowStdIo<T>

Returns a copy of the value.

pub fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T: Copy> Copy for AllowStdIo<T>

impl<T: Debug> Debug for AllowStdIo<T>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<T: Eq> Eq for AllowStdIo<T>

impl<T: Hash> Hash for AllowStdIo<T>

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

pub fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given Hasher.

impl<T: Ord> Ord for AllowStdIo<T>

fn cmp(&self, other: &AllowStdIo<T>) -> Ordering

This method returns an Ordering between self and other.

#[must_use]pub fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]pub fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]pub fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl<T: PartialEq> PartialEq<AllowStdIo<T>> for AllowStdIo<T>

fn eq(&self, other: &AllowStdIo<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &AllowStdIo<T>) -> bool

This method tests for !=.

impl<T: PartialOrd> PartialOrd<AllowStdIo<T>> for AllowStdIo<T>

fn partial_cmp(&self, other: &AllowStdIo<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]pub fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]pub fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]pub fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]pub fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T> Read for AllowStdIo<T> where
    T: Read, 

fn read(&mut self, buf: &mut [u8]) -> Result<usize>

Pull some bytes from this source into the specified buffer, returning how many bytes were read.

fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize>

Like read, except that it reads into a slice of buffers.

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize>

Read all bytes until EOF in this source, placing them into buf.

fn read_to_string(&mut self, buf: &mut String) -> Result<usize>

Read all bytes until EOF in this source, appending them to buf.

fn read_exact(&mut self, buf: &mut [u8]) -> Result<()>

Read the exact number of bytes required to fill buf.

pub fn is_read_vectored(&self) -> bool

🔬 This is a nightly-only experimental API. (can_vector)

Determines if this Reader has an efficient read_vectored implementation.

pub unsafe fn initializer(&self) -> Initializer

🔬 This is a nightly-only experimental API. (read_initializer)

Determines if this Reader can work with buffers of uninitialized memory.

pub fn by_ref(&mut self) -> &mut Self

Creates a “by reference” adaptor for this instance of Read.

pub fn bytes(self) -> Bytes<Self>

Transforms this Read instance to an Iterator over its bytes.

pub fn chain<R>(self, next: R) -> Chain<Self, R> where
    R: Read, 

Creates an adaptor which will chain this stream with another.

pub fn take(self, limit: u64) -> Take<Self>

Creates an adaptor which will read at most limit bytes from it.

impl<T> Seek for AllowStdIo<T> where
    T: Seek, 

fn seek(&mut self, pos: SeekFrom) -> Result<u64>

Seek to an offset, in bytes, in a stream.

pub fn stream_len(&mut self) -> Result<u64, Error>

🔬 This is a nightly-only experimental API. (seek_stream_len)

Returns the length of this stream (in bytes).

pub fn stream_position(&mut self) -> Result<u64, Error>

Returns the current seek position from the start of the stream.

impl<T> StructuralEq for AllowStdIo<T>

impl<T> StructuralPartialEq for AllowStdIo<T>

impl<T> Unpin for AllowStdIo<T>

impl<T> Write for AllowStdIo<T> where
    T: Write, 

fn write(&mut self, buf: &[u8]) -> Result<usize>

Write a buffer into this writer, returning how many bytes were written.

fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> Result<usize>

Like write, except that it writes from a slice of buffers.

fn flush(&mut self) -> Result<()>

Flush this output stream, ensuring that all intermediately buffered contents reach their destination.

fn write_all(&mut self, buf: &[u8]) -> Result<()>

Attempts to write an entire buffer into this writer.

fn write_fmt(&mut self, fmt: Arguments<'_>) -> Result<()>

Writes a formatted string into this writer, returning any error encountered.

pub fn is_write_vectored(&self) -> bool

🔬 This is a nightly-only experimental API. (can_vector)

Determines if this Writer has an efficient write_vectored implementation.

pub fn write_all_vectored(
    &mut self,
    bufs: &mut [IoSlice<'_>]
) -> Result<(), Error>

🔬 This is a nightly-only experimental API. (write_all_vectored)

Attempts to write multiple buffers into this writer.

pub fn by_ref(&mut self) -> &mut Self

Creates a “by reference” adaptor for this instance of Write.