use std::io::{Read, Write};

use self::EndianOption::*;
use self::LimitOption::*;
use super::{DefaultOptions, Options};
use de::read::BincodeRead;
use error::Result;
use serde;

/// A configuration builder whose options Bincode will use
/// while serializing and deserializing.
///
/// ### Options
/// Endianness: The endianness with which multi-byte integers will be read/written.  *default: little endian*
/// Limit: The maximum number of bytes that will be read/written in a bincode serialize/deserialize. *default: unlimited*
///
/// ### Byte Limit Details
/// The purpose of byte-limiting is to prevent Denial-Of-Service attacks whereby malicious attackers get bincode
/// deserialization to crash your process by allocating too much memory or keeping a connection open for too long.
///
/// When a byte limit is set, bincode will return `Err` on any deserialization that goes over the limit, or any
/// serialization that goes over the limit.
#[derive(Clone, Debug)]
#[deprecated(
    since = "1.3.0",
    note = "please use the `DefaultOptions`/`Options` system instead"
)]
pub struct Config {
    limit: LimitOption,
    endian: EndianOption,
}

#[derive(Clone, Copy, Debug)]
enum LimitOption {
    Unlimited,
    Limited(u64),
}

#[derive(Clone, Copy, Debug)]
enum EndianOption {
    Big,
    Little,
    Native,
}

macro_rules! config_map {
    ($self:expr, $opts:ident => $call:expr) => {
        match ($self.limit, $self.endian) {
            (Unlimited, Little) => {
                let $opts = DefaultOptions::new()
                    .with_fixint_encoding()
                    .allow_trailing_bytes()
                    .with_no_limit()
                    .with_little_endian();
                $call
            }
            (Unlimited, Big) => {
                let $opts = DefaultOptions::new()
                    .with_fixint_encoding()
                    .allow_trailing_bytes()
                    .with_no_limit()
                    .with_big_endian();
                $call
            }
            (Unlimited, Native) => {
                let $opts = DefaultOptions::new()
                    .with_fixint_encoding()
                    .allow_trailing_bytes()
                    .with_no_limit()
                    .with_native_endian();
                $call
            }

            (Limited(l), Little) => {
                let $opts = DefaultOptions::new()
                    .with_fixint_encoding()
                    .allow_trailing_bytes()
                    .with_limit(l)
                    .with_little_endian();
                $call
            }
            (Limited(l), Big) => {
                let $opts = DefaultOptions::new()
                    .with_fixint_encoding()
                    .allow_trailing_bytes()
                    .with_limit(l)
                    .with_big_endian();
                $call
            }
            (Limited(l), Native) => {
                let $opts = DefaultOptions::new()
                    .with_fixint_encoding()
                    .allow_trailing_bytes()
                    .with_limit(l)
                    .with_native_endian();
                $call
            }
        }
    };
}

impl Config {
    #[inline(always)]
    pub(crate) fn new() -> Config {
        Config {
            limit: LimitOption::Unlimited,
            endian: EndianOption::Little,
        }
    }

    /// Sets the byte limit to be unlimited.
    /// This is the default.
    #[inline(always)]
    pub fn no_limit(&mut self) -> &mut Self {
        self.limit = LimitOption::Unlimited;
        self
    }

    /// Sets the byte limit to `limit`.
    #[inline(always)]
    pub fn limit(&mut self, limit: u64) -> &mut Self {
        self.limit = LimitOption::Limited(limit);
        self
    }

    /// Sets the endianness to little-endian
    /// This is the default.
    #[inline(always)]
    pub fn little_endian(&mut self) -> &mut Self {
        self.endian = EndianOption::Little;
        self
    }

    /// Sets the endianness to big-endian
    #[inline(always)]
    pub fn big_endian(&mut self) -> &mut Self {
        self.endian = EndianOption::Big;
        self
    }

    /// Sets the endianness to the the machine-native endianness
    #[inline(always)]
    pub fn native_endian(&mut self) -> &mut Self {
        self.endian = EndianOption::Native;
        self
    }

    /// Serializes a serializable object into a `Vec` of bytes using this configuration
    #[inline(always)]
    pub fn serialize<T: ?Sized + serde::Serialize>(&self, t: &T) -> Result<Vec<u8>> {
        config_map!(self, opts => ::internal::serialize(t, opts))
    }

    /// Returns the size that an object would be if serialized using Bincode with this configuration
    #[inline(always)]
    pub fn serialized_size<T: ?Sized + serde::Serialize>(&self, t: &T) -> Result<u64> {
        config_map!(self, opts => ::internal::serialized_size(t, opts))
    }

    /// Serializes an object directly into a `Writer` using this configuration
    ///
    /// If the serialization would take more bytes than allowed by the size limit, an error
    /// is returned and *no bytes* will be written into the `Writer`
    #[inline(always)]
    pub fn serialize_into<W: Write, T: ?Sized + serde::Serialize>(
        &self,
        w: W,
        t: &T,
    ) -> Result<()> {
        config_map!(self, opts => ::internal::serialize_into(w, t, opts))
    }

    /// Deserializes a slice of bytes into an instance of `T` using this configuration
    #[inline(always)]
    pub fn deserialize<'a, T: serde::Deserialize<'a>>(&self, bytes: &'a [u8]) -> Result<T> {
        config_map!(self, opts => ::internal::deserialize(bytes, opts))
    }

    /// TODO: document
    #[doc(hidden)]
    #[inline(always)]
    pub fn deserialize_in_place<'a, R, T>(&self, reader: R, place: &mut T) -> Result<()>
    where
        R: BincodeRead<'a>,
        T: serde::de::Deserialize<'a>,
    {
        config_map!(self, opts => ::internal::deserialize_in_place(reader, opts, place))
    }

    /// Deserializes a slice of bytes with state `seed` using this configuration.
    #[inline(always)]
    pub fn deserialize_seed<'a, T: serde::de::DeserializeSeed<'a>>(
        &self,
        seed: T,
        bytes: &'a [u8],
    ) -> Result<T::Value> {
        config_map!(self, opts => ::internal::deserialize_seed(seed, bytes, opts))
    }

    /// Deserializes an object directly from a `Read`er using this configuration
    ///
    /// If this returns an `Error`, `reader` may be in an invalid state.
    #[inline(always)]
    pub fn deserialize_from<R: Read, T: serde::de::DeserializeOwned>(
        &self,
        reader: R,
    ) -> Result<T> {
        config_map!(self, opts => ::internal::deserialize_from(reader, opts))
    }

    /// Deserializes an object directly from a `Read`er with state `seed` using this configuration
    ///
    /// If this returns an `Error`, `reader` may be in an invalid state.
    #[inline(always)]
    pub fn deserialize_from_seed<'a, R: Read, T: serde::de::DeserializeSeed<'a>>(
        &self,
        seed: T,
        reader: R,
    ) -> Result<T::Value> {
        config_map!(self, opts => ::internal::deserialize_from_seed(seed, reader, opts))
    }

    /// Deserializes an object from a custom `BincodeRead`er using the default configuration.
    /// It is highly recommended to use `deserialize_from` unless you need to implement
    /// `BincodeRead` for performance reasons.
    ///
    /// If this returns an `Error`, `reader` may be in an invalid state.
    #[inline(always)]
    pub fn deserialize_from_custom<'a, R: BincodeRead<'a>, T: serde::de::DeserializeOwned>(
        &self,
        reader: R,
    ) -> Result<T> {
        config_map!(self, opts => ::internal::deserialize_from_custom(reader, opts))
    }

    /// Deserializes an object from a custom `BincodeRead`er with state `seed` using the default
    /// configuration. It is highly recommended to use `deserialize_from` unless you need to
    /// implement `BincodeRead` for performance reasons.
    ///
    /// If this returns an `Error`, `reader` may be in an invalid state.
    #[inline(always)]
    pub fn deserialize_from_custom_seed<
        'a,
        R: BincodeRead<'a>,
        T: serde::de::DeserializeSeed<'a>,
    >(
        &self,
        seed: T,
        reader: R,
    ) -> Result<T::Value> {
        config_map!(self, opts => ::internal::deserialize_from_custom_seed(seed, reader, opts))
    }
}